The Air Force 1 has many different models with different designs and materials. However, most Nike Air Force Ones have leather uppers, which can easily get wrinkled. Nobody likes to see their favorite shoe wrinkled.
If you want to learn not to wrinkle the Air Force? You are in the right place. I have been wearing the Air Force 1 for a long time and wrinkles are kept to a minimum. In this article, I'll show you how to prevent Air Forces from wrinkling so you can do the same.
Stay tuned as I discuss how to deal with crumpled Air Force 1s and take steps to prevent the Air Force from collapsing.
Is it okay to dub Air Force 1?
When you wear shoes and move, they move with your feet. Shoes need to move so that you can walk comfortably. If the shoes did not follow your natural movement, you would feel uncomfortable.
The movement of your foot flexes the shoe and compresses the material of the shoe. Because of this, you end up with some uncomfortable wrinkles.Wrinkles do not damage the shoe, but it loses its good looks..
Therefore, you need to learn how to deal with wrinkles or care for your shoes to keep wrinkling to a minimum. I will talk about all this in this article.
How not to crumple your air forces?
So how do you keep the Air Force from wrinkling? Basically, there are 2 ways to protect your Nike Air Forces from wrinkles.
avoid wrinkles-
- With kink protection
- No twist protection
I will discuss both options so as not to double the air forces. Let's start with the anti-wrinkle method.
How to prevent airborne wrinkle protection?
The wrinkle guard is designed to fit comfortably inside your shoe, allowing it to retain its shape. The protectors are made from thermoplastic and polyethylene materials, so they remain strong and durable even after prolonged use. So how do you use anti-wrinkle? Let's find out
How do I install a wrinkle guard?
A strain guard is very easy to put on. You can install it in minutes by following a few simple steps.
- First, untie the laces as much as possible so you can put the wrinkle protector inside.
- Take out the template. Insert the pleat protector and slide it all the way. Once it is correctly positioned, reinsert the template.
That's all. You have reduced the probability of wrinkles appearing in your clothes.Nikeair force 1
Do you need to cut the crease guards?
If you have wide feet or are comfortable wearing a crease guard, you might try trimming the crease guard to make it more comfortable.
Do anti-wrinkle protectors damage your feet?
Anti-wrinkle for Air Force 1 is designed to fit smoothly in the shoe. In my experience, it hurt a bit around my little toe. So I trimmed the crease guard around that region and I was ready to go.
Shoe protectors or crease protectors are not meant to hurt your feet. If this is the case, consider trimming the part where your feet hurt. It should solve the problem.
Is wrinkle protection worth it?
In my opinion, wrinkle guards are definitely worth the money. They are really affordable. You can get a wrinkle guard for about ten dollars. Anti-wrinkle prevents your Air Force 1 from wrinkling.
You won't feel uncomfortable when you get the right one. You can walk and run with the anti-wrinkle protection without your shoes getting wrinkled. I see no reason why wrinkle protection shouldn't be worth it.
However, anti-wrinkle is not the only solution. There are other ways to fix wrinkled Air Forces or prevent them from appearing if you think the anti-wrinkle isn't necessary. I don't use anti-wrinkle because I don't mind the extra effort to keep my shoe in good condition.
So I don't think wrinkle protection is worth it. They feel a little weird to me.
I hope you now have some decent ideas on how not to crease AF1 with an anti-crease.
The best anti-wrinkle protection of the Air Force 1
There are many anti-wrinkle products. I have tried several of them and found theseForce Field Anti Wrinklebe the best forNike Air Force 1. It fits comfortably in the AF1.
The best thing about wrinkle guard is the adhesive property. It sticks to the shoe and stays in place. There are perforation holes in the gusset to improve breathability.
SoHow to prevent airborne forces from collapsing? The simple answer, get an anti-wrinkle.
But what if you don't have one?
How can you not wrinkle your Air Force without a wrinkle guard?
I have already discussed how to prevent wrinkles in AF1 using a wrinkle remover. You can do that if you want. But if, like me, you feel like wrinkle guard isn't worth the trouble, here are some tips to fix the problem.
Here are 3 tips to keep your Air Forces from wrinkling without using a wrinkle remover.
- get the right size
You can reduce wrinkles on your Air Force 1 by choosing the correct size. The Air Force 1 has a wide toe box. The shoe is also a bit big.
I recommend going down a half size for a perfect fit and to reduce the risk of wrinkles. If you have wide feet, get a couple sizes true or go up a half size. You should also learn not to bend the Air Force while walking.
- take care of your shoe
There are special products and oils for the care of leather shoes. You can use them to prevent wrinkles from expanding. These conditioners also don't need heat.
Important:Before applying conditioners, make sure they won't stain your shoe. Apply some conditioner to a small part of the shoe to confirm this.
You must condition the entire shoe. Take a little more time to get your sneakers to have a consistent look.
- Use shoe trees
You can invest in some good lasts for your Air Force. Place a last in the shoe after each use. Prevent wrinkles in your AF1.
So these are the ways on how not to wrinkle AF1 without anti-wrinkle.
You can also read our article,How do I get rid of wrinkles in Nike blazers?
How to reduce the size of the air force?
Nobody likes to see the Air Force wrinkled. You can try 3 easy methods to remove wrinkles from your Air Force 1.
- Method 1: Apply heat with an iron
This is the easiest and most popular way to remove wrinkles from an Air Force 1. You can take paper/newspaper/cardboard or some socks and roll them up into a ball. Then tuck these things into the shoe from toe to heel so that the shoe holds its shape firmly.
- After that, take a washcloth, moisten it and place it on the folds.
- Increase the heat of your iron to 60-70 degrees Fahrenheit.
- Hit the iron on the damp cloth for a few seconds and repeat the process.
- After a few seconds, check the shoe again to make sure the crease is gone.
- When the wrinkles disappear, stop ironing to avoid damaging the shoe.
- Keep the shoe filled until it is completely cold.
This strategy works best with leather sneakers. The heat softens the material of the shoe and stretches the crease mark. The water ensures that your shoe does not burn.
You may not want to use an iron for this purpose. Don't worry. We wrote about how to fold Air Force 1 without an iron. let's dive
How do I remove wrinkles from Air Force 1 without an iron?
- Method 1: Use a hair dryer
If you have a hair dryer, you can use it instead of an iron. Hair dryers work well on leather shoes.
You should wear cedar shoe trees while using a blow dryer to ensure that the shoe holds its shape and stays cool on the inside.
How to use a hair dryer
- Turn the dryer on a low heat setting.
- Use the hair dryer 20 cm from the AF1.
- Blow the top of the shoe several times with the shoe and lower it.
- Stretch the warm leather against the last.
- Repeat the process until the wrinkles disappear.
You must keep the last in place while the shoe cools. Apply some shoe polish or conditioner to the shoe while using direct heat.
A conditioner or shoe polish restores moisture parched by heat. Use this method to keep your Air Force 1 looking its best.
- Method 2: steam your shoes
Here is another alternative method to remove wrinkles from Air Force 1 without an iron.
All you need for this method is a piece of cloth, a washcloth or towel, and a microwave. This is how you do it.
- Soak the cloth/towel in water and wring it out so it is just damp.
- Now place the cloth in a heatproof container and place it in the microwave.
- Microwave the dish on high heat for 30 seconds.
- Take out the hot towel and rub it on the shoe.
- The leather of the shoe is heated and the wrinkles gradually disappear.
- Place a last in your shoe while it cools.
Depending on the creases in your shoe, you may need to repeat the process. More folds require more effort.
You can also read our article,How do Doc Martens get wrinkled?
How not to crumple the airborne forces?(Summary)
Some people don't mind the creases on their Air Force 1 because they feel the creases add to the vibe of the shoe. Well, I don't feel that way and I'm not a big fan of wrinkles in my sneakers. Since you're here, you probably hate wrinkles too.
There are many ways to prevent the Air Force from wrinkling. You can use a wrinkle guard to prevent the Air Forces from wrinkling. Force Field wrinkle protection is best for the Air Force 1. If you don't want to use anti-wrinkle, you need to take care of your AF1.
I recommend buying the right shoes. You can put lasts in your shoes after each use. If you end up with some wrinkles, don't worry. Just apply the simple techniques I've discussed in this article and you'll be rid of those nasty wrinkles in no time.